Reference Guide

544 Inspectors
Properties Inspector overview
Figure 177. Use the Display menu to configure modules in the Track Inspector.
See:
“Track Inspector overview” on page 529
“Properties Inspector overview” on page 544
“Properties Inspector - Clip Properties” on page 546
“Properties Inspector - Track Properties” on page 553
“ProChannel (Producer only)” on page 963
“Inspectors” on page 523
“Arpeggiator” on page 269
“Input quantizing” on page 267
“Track-by-track playback” on page 195
“Changing track settings” on page 205
“Routing and mixing digital audio” on page 841
Properties Inspector overview
The Properties Inspector shows properties for the selected clip(s) or track(s), depending on whether
the Clip or Track button is pressed:
• Clip. The Clip Properties Inspector displays settings for the currently selected clip(s). For
details, see “Properties Inspector - Clip Properties” on page 546.
• Track. The Track Properties Inspector lets you type a track name, specify the automation write
mode and time base, specify an audio track’s AudioSnap render modes, specify the default clip
colors, and enter a text description for the selected track(s). For details, see “Properties Inspector
- Track Properties” on page 553.
• Bus. The Bus Properties Inspector lets you type a bus name, specify the automation write mode
and time base, and enter a text description. For details, see “Properties Inspector - Bus
Properties” on page 556.
The Properties Inspector contains multiple sections that you can show/hide by clicking the section’s
header bar. By default, the Clip Properties Inspector and Track Properties Inspector are collapsed.
Only one section can be visible at a time.