Reference Guide

520 Control Bar overview

• Time. Start time of the selected event(s), specified as a valid M:B:T time value. Separate values

with a colon or a space. For example, measure 2, Beat 3, Tick 720 would be written as 2:3:720.

• Duration. Duration of the selected event(s), specified as a PPQ value. You can also specify a

percentage of the current duration value. For example, to double the duration, type 200% and

press ENTER.

• Pitch. Pitch of the selected event(s), specified as note names (C0 through G10) or note

numbers (0 through 127). You can also use a modifier to raise or lower the value by a number of

half-steps. To raise the pitch by 2 half-steps, type +2 and press ENTER. To lower the pitch by 2

half-steps, type -2 and press ENTER.

• Vel. Velocity value of the selected event(s), specified as a value between 0 and 127. You can

also use a modifier to raise or lower the current velocity value (+/- 0 through 127). You can also

specify a percentage of the current velocity value. For example, to double the velocity, type 200%

and press ENTER.

• Channel. MIDI channel assigned to the selected events, specified as a value between 1

through 16.