Reference Guide

510 Control Bar overview

track compensated as normal. For details, see “Live Input PDC override” on page 282.

• Allow Automation Writing . Globally enable/disable the ability to write automation.

• Global Automation Playback . Globally enable/disable all automation playback.

• Offset mode . Enable/disable Offset mode. In Offset mode, you “offset” the current

automation in a track using a parameter’s controls. For details, see “Envelope mode and Offset

mode” on page 1031.

See:

“Silencing tracks” on page 198

“To mute or solo a bus” on page 844

“Muting and soloing soft synth tracks” on page 813

“Soloing tracks” on page 198

“Dim Solo mode” on page 200

“Exclusive Solo mode” on page 201

“Arming tracks for recording” on page 263

“Input monitoring” on page 278

“To globally bypass all effects in a project” on page 869

“To globally bypass all track, bus or clip effects” on page 870

“Live Input PDC override” on page 282

“Automation Read and Automation Write buttons” on page 1007

“Recording individual fader or knob movements” on page 1009

“Creating and editing automation envelopes” on page 1019

“Automating individual effects parameters” on page 1036

“Recording automation data from an external controller” on page 1038