Reference Guide

319
Arranging tracks
Arranging and editing
Configuring the display of tracks in the Track view
There are several commands in the Track view View menu and Track pane context menu that allow
you to configure the appearance of your tracks in the Track view. You can use these commands to
zoom in or out, show or hide any combination of tracks, and revert back to previous display settings.
The following table lists each of these commands and provides an explanation of each.
Command Description Shortcut
Show and Fit Selection This command hides all tracks which are not selected. The
remaining tracks are adjusted in size vertically and horizontally to
fit in the Track view, without scrolling if possible. All track
selections are lost after this command is executed.
CTRL+ALT+H
Fit Tracks to Window All currently displayed tracks are adjusted in size vertically to fit
in the Track view, without scrolling if possible.
F
Fit Project to Window This command resizes all tracks both vertically and horizontally
to fit in the Tracks view.
SHIFT+F
Lock Height This command maintains the track’s height when you use a
zoom or fit command. See “To lock or unlock the height of a
track” on page 320.
n/a
Show Only Selected
Tracks
This command hides all tracks which are not selected. The
remaining tracks are adjusted in size vertically.
CTRL+SHIFT+H
Hide Selected Tracks Hides all selected tracks. CTRL+H
Show All Tracks Shows all tracks in your project, including these hidden using the
Track Manager.
SHIFT+H
Track Manager Opens the Track Manager dialog box. For more information
about the Track Manager dialog box, see “Track Manager
dialog” on page 1764.
H
Undo View Change This command restores the view to its previous state. There are
up to 16 levels of undo.
ALT+Z
Redo View Change This command restores the view to the state prior to the Undo
View Change command.
ALT+SHIFT+Z
Table 46.