Reference Guide

255
Creating a new project
Recording
To change your Metronome settings
1. Do one of the following to access metronome settings:
• Click the metronome icon in the Control Bar’s Transport module.
• Press SHIFT+F3.
• Right-click the Playback Metronome on/off button or Record Metronome on/off button
in the Control Bar’s Transport module.
•Go to Edit > Preferences > Project - Metronome.
2. Change the metronome settings as indicated in the following table.
3. Click OK.
Your metronome settings will be saved with the project file.
To do this Do this
Enable the metronome during playback Select the Playback check box.
Enable the metronome during recording Select the Recording check box.
Enable the count-in Enter the number of clicks for the count-in in the Count-in
box, and select Measures or Beats.
Note: The Record count-in always applies if there is a
specified value, even if Playback and Record are not
selected.
Use the audio metronome Select Use Audio Metronome.
Use a MIDI note as the sound Select Use MIDI Note and choose the output, channel, and
other settings.
Enable beat subdivisions Select the desired subdivision value in the Beat
Subdivision list. The selected value is the subdivision for
non-accented audible clicks.
Table 33.