Reference Guide

1057
Screensets
Window management
To name or rename the current screenset
1. Make sure the Screenset module is visible in the Control Bar.
2. Click the Screenset menu and select Rename Current Screenset.
The Rename Screenset dialog box opens.
3. Type a new name and click OK.
To prevent the current screenset from being modified
1. Make sure the Screenset module is visible in the Control Bar.
2. Click the Screenset menu and select Lock/Unlock Current Screenset.
A padlock icon appears next to the screenset name in the Screenset menu to indicate that the
screenset is locked. To unlock the screenset, select the Lock/Unlock Current Screenset
command again.
To import screensets from another project
1. Make sure the Screenset module is visible in the Control Bar.
2. Open the target project that you want to import screensets into.
3. While the target project is open, also open the source project you want to import screensets
from.
4. Select the target project to give it focus.
5. Click the Screenset menu and select Import Screensets from <source file name>.cwp.
SONAR imports screensets from the source project and overwrites the corresponding
screensets in the target project. Screensets that are locked in the target project will not be
overwritten.
To duplicate the current screenset
SONAR can store up to 10 screensets per project. You can copy the current screenset to any other
preset location in the same project. To do so:
1. Make sure the Screenset module is visible in the Control Bar.
2. Do one of the following:
• On the Screenset menu, point to Duplicate Current Screenset to, then select the desired
screenset location (1 through 0).
Note: You can not rename a locked screenset.
Note: If more than two projects are open, SONAR only shows the first one that contains
screensets as a valid source. The Import Screensets command is unavailable if the source
project doesn’t contain any valid screensets or if only one project is open.