User Manual

Cajun Manual Page 24
Side Cover (CH-5).
10. Slide the Right Side Cover (CH-31) onto the Lever Axle (CH-25) and
ensure the Lever Catch (CH-9) is inserted into the boss on the back
side of the Right Side Cover.
11. Pinch the Reel together, and use a pair of pliers to cock the reel
assembly.
12. With the reel in the cocked position, work the Wheel Assembly
(CH-23) into the appropriate boss on the Right Side Cover (CH-31).
Once the Wheel Assembly falls into the boss, the Side Cover will
seat itself to the Reel.
13. Insert the three screws (CH-29) on the Right Side Cover (CH-31)
and tighten the screws. Do not over tighten.
14. Replace the Trigger Mounts (CH-10) to each side of the Lever Axle
(CH-25).
15. Line up the trigger the Trigger (CH-12) and insert the 4 screws (CH-
10). Tighten the 4 screws, but do not over tighten.
16. Snug the two set screws on the end of the Trigger Mounts (CH-
11). Do not over tighten.