Specification

PRODUCT NAME
INSTALLATION INSTRUCTIONS
For Warranty Issues or Questions, Contact Cahaba Classics at [phone]
©2018 CAHABA C
LASSICS. ALL RIGHTS RESERVED.
1 2
3 4
5
Attach the
diverter lever (C)
onto diverter
valve (D) and
tighten the
diverter screw.
read the tapered ends of the nipples into the swivel
mounts on the outside of the tub. read the large
locknuts and metal washers onto the other ends of the
nipples and secure the shower set to the tub.
Align the valve
assembly (A)
with the swivel
mounts (B)
and secure with
the nuts on the
swivel mounts.
Rubber washer
must be in place.
Tighten with a
wrench.
Gather all recommended equipment and supplies.
Handles are identied HOT and COLD. e hot
handle must be to the left and cold to the right.
Be sure the water supply is turned o before starting
installation.
Cushion the wrench or slip joint pliers with an old
cloth to protect the nish of the xture.
Apply thread
sealant or
plumber’s tape
to the threads at
end of all pipes.
If two pipes
arrive attached,
be sure to take
them apart and
apply sealant
before installing.
TRADITIONAL WALL-MOUNTED TUB FILLER WITH HANDSHOWER
INSTALLATION INSTRUCTIONS
6
Install the handles. Be sure the broach screws (E) are
tightened before installing handles.
Install the handles (F) on the broaches (E) and tighten
the set screws using the allen wrench (G) provided
8
Attach the hose
(I) to the outlet
of the cradle
(H) and the
handshower (J).
A
B
C
D
E
F
G
E
7
Remove the
washer and brass
nut from the
riser joint on
the faucet body.
Be sure there is
a washer under
the brass nut of
the cradle, then
connect the
cradle (H) to the
faucet body (A).
A
H
H
J
I