Instructions / Assembly

FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (866) 837-2550.

CONNECT THE WATER

1. Thread the nut on the supply line onto the outlet of the water supply

valve and tighten with a wrench. Do not overtighten.

X IMPORTANT: Remember the hot side inlet tube is indicated by a string

or tape. Avoid twisting wires together or placing the wires close to each

other and damaging.

FINISHING

1. After installation is completed, turn on the hot and cold water supplies.

Check for leaks.

2. Remove the aerator assembly by unscrewing it from the faucet in a

counterclockwise direction. Turn the faucet on to the warm position

where it mixes hot and cold water.

3. Flush the water lines for one minute. This ushes away any debris that

could cause damage to internal parts.

4. Check for leaks. Re-tighten any connections if necessary, but do not

overtighten.

5. Reinstall the aerator assembly by hand tightening it back onto the

faucet.

Attach supply line to

water supply valve.

GOOSENECK BAR FAUCET

Installation & Care Instructions

REMOVE AERATOR ASSEMBLY

TEST FAUCET AND FLUSH WATER LINES