Instructions / Assembly

ManualsBrandsCahaba ManualsKitchenUndermount Stainless Steel 14-1/2 in. Small Single Bowl Bar Sink with Faucet in Brushed Nickel

FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (866) 837-2550.

GOOSENECK BAR FAUCET

Installation & Care Instructions

BEFORE YOU START

• Make sure you have all necessary parts by checking the diagram and parts list.

If any part is missing or damaged, please contact Cahaba Customer Service at

(866) 837-2550 for a replacement.

• Turn off the hot and cold water supply at the angle stops and turn on the old

faucet to release any built up pressure. Remove existing faucet. Clean sink or

countertop to remove any debris, plumber’s putty, or silicone.

• Place bucket under angle stops. Turn on to flush any debris prior to installing

new plumbing. Shut off angle stops.

• Pre-drilled hole size requirement: 1-3/8”

• This faucet is rated for normal residential use only.

RECOMMENDED TOOLS



Adjustable wrench



Pipe wrench



Safety glasses



Bucket



Screwdriver



Plumbing tape



Towels



Silicone sealant

FOR MODEL NUMBER

CA6114SS CA6114CP

1 M5 round head screws

2 Lock nut

3 Stainless steel gasket

4 Rubber gasket

5 Threaded pipe

6 Bottom gasket

7 Faucet body

8 M6 screw

9 Plastic lock ring

10 O-ring

11 Plastic lock ring

12 Rub ring

13 Curved arm

14 Gasket

15 Aerator

16 Aerator holder

17 Handle bar

18 M6 screw

19 Handle knob

20 Cartridge cover

21 Locking nut

22 Cartridge

23 Hose

FAUCET PARTS

Summary of content (6 pages)

PAGE 1
GOOSENECK BAR FAUCET Installation & Care Instructions FOR MODEL NUMBER CA6114SS CA6114CP RECOMMENDED TOOLS Adjustable wrench Pipe wrench BEFORE YOU START Safety glasses • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Cahaba Customer Service at (866) 837-2550 for a replacement. Bucket • Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure.
PAGE 3
GOOSENECK BAR FAUCET Installation & Care Instructions ASSEMBLE THE FAUCET 1. Locate and identify the hot and cold input on the faucet body. IDENTIFY HOT AND COLD INPUT 2. Attach the hoses to the faucet. 3. Attach the threaded pipe to the faucet assembly. XX NOTE: Tie a string or wrap a piece of tape around the end of the hot water hose for easy identification later. ATTACH HOSES AND THREADED PIPE INSTALL THE FAUCET 1. Place the faucet through the hole in the sink deck or counter top. 2.
PAGE 4
GOOSENECK BAR FAUCET Installation & Care Instructions CONNECT THE WATER 1. Thread the nut on the supply line onto the outlet of the water supply valve and tighten with a wrench. Do not overtighten. XX IMPORTANT: Remember the hot side inlet tube is indicated by a string or tape. Avoid twisting wires together or placing the wires close to each other and damaging. Attach supply line to water supply valve. FINISHING 1. After installation is completed, turn on the hot and cold water supplies. Check for leaks.
PAGE 5
GOOSENECK BAR FAUCET Care & Maintenance Instructions RECOMMENDED CLEANERS XX For stains or light scratches, we suggest a mildly aggressive cleaner. You can also try a paste of baking soda and water, but be sure to rinse well and dry. XX When using any of these cleaners, it is critical that you rub in the direction of the grain lines, rinse completely and towel dry. XX For stubborn stains and more noticeable scratches, we suggest a more aggressive cleaner such as Bar Keeper’s Friend©.
PAGE 6
LIMITED LIFETIME WARRANTY This product has been manufactured and tested to the highest quality standards by Cahaba. We offer our customers thoughtfully crafted fixtures & accessories, engineered for enduring performance over years of use. WHO IS COVERED BY THE WARRANTY This warranty extends to the original purchaser only. This warranty is not transferable, between homes or owners and is only applicable to residential use.