Technical data

General operating indications

DESCALING SIGNAL:

• When the D blinks YELLOW/ORANGE and the machine emits 3 beeps (after which it

will remain lit), it is advisable to perform the descaling cycle. (See section: Descaling)

HEATING (This will typically take 45-50 sec):

• The buttons A-B-C blink at the same time.

WHEN THE WATER RUNS OUT DURING OPERATION:

• The water tank is empty when the D indicator light blinks RED and the appliance emits

3 beeps.

• Fill the tank with fresh, still water.

• Press one of the buttons A-B-C. Wait for the machine to complete the priming cycle and

ﬁ ll with water.

• When the buttons A-B-C turn on and remain steadily lit, the appliance is ready for use.

IF THE LEVER IS RAISED:

• If the lever is raised during the delivery of a product, the machine can emit jets of hot

water. Risk of burns!

• The

D indicator light

blinks RED and a beep is emitted. The appliance will immediately

stop dispensing.

• Close the lever.

• Press a button A-B-C to reset the alarm.

• The appliance is ready for use.

Adjusting the cup / mug height

• The appliance can be adjusted for the use of mugs or espresso cups.

• The appliance is initially set for the use of large cups or mugs.

• For best results using the cups, you have to lift and rotate the grid placed over the drip

tray.

• For very tall mugs/latte glasses the drip tray can be removed.