Technical data

Programming the quantity of coffee in a cup

• Raise the lever to open the capsule compartment.

• Insert the capsule, pressing it gently into place.

• Close the lever fully.

• Place a cup or mug under the coffee dispensing spout.

• Press and hold the desired coffee button (Through the entire cycle).

• On reaching the desired amount of coffee, release the button. Now the button is

programmed.

• The quantity of coffee dispensed may be programmed, from a minimum of 30 ml

to a maximum of 250 ml.

• Recommended Programming/Current Programming:

·30ml: Espresso (30ml)

·60ml: Double Espresso (60ml).

·120 ml: Tea and Hot Water (Maximum 250ml).

Turning on the appliance - Daily & Regular Usage

• Fill the tank with fresh, still water.

• Turn on the machine by pressing the On/Off Button.

• The buttons A-B-C blink at the same time; the machine is warming up. When the

buttons turn on and remain steadily lit, the appliance is ready for use.

A B