Technical data

5
Instructions for use and disposal
The appliance has been manufactured using high quality materials that can be
reused or recycled. Dispose of the appliance in a suitable waste collection centre.
First use or after a long period of no operation
Fill the tank with fresh, still water (either by lling through the water tank cover or removing
the water tank).
Plug in the appliance and turn it on.
Make sure the lever is closed.
Along with the A-B-C keys, the D indicator light will also alternately blink RED.
Place a large container (at least 250 ml) under the coffee dispensing spout.
Press one of the buttons A-B-C. Wait for the machine to complete the priming cycle and ll
with water (you will hear the pump noise during this period). The D indicator light switches
off.
NOTE:If the buttons A-B-C and the D indicator light continue to blink after the lling
procedure has ended, repeat the steps in previous point.
When the buttons A-B-C blink at the same time; the machine is warming up.
When the buttons A-B-C turn on and remain steadily lit, rinse by pressing the C button.
Press the button again to rinse a second time. Wait for the machine to complete the rinse
cycle.
At the end of this operation, empty out any water from the used capsule drawer.
1
2
3
4
A B
C
D