Technical data

11
No coffee is brewed.
The D indicator light
blinks RED.
- The water tank is empty.
- Incorrect use of capsules
with C button.
- Fill the tank with fresh water.
Press a button to reload the circuit.
When the buttons remain steadily
lit, the appliance is ready for use.
- Only Tea Capsules and hot water
to be used with C Button.
The coffee is not
hot
enough.
- Cold cups / mugs.
- Scale build-up in machine.
- Preheat the cup.
- Descale the machine.
The lever cannot be
lowered.
The used capsule drawer
is full. Capsule stuck
inside the machine.
Empty out the used capsule
drawer.
Remove the jammed capsule.
The D indicator light
is on and steadily lit in
RED.
Heating problems. Contact the Maranatha Customer
Service line 02 9894 6247 or return
to your store of purchase.
When a coffee
dispensing button is
pressed, the machine
seems to start running,
but stops without
dispensing coffee or
after dispensing only a
small amount.
Incorrect quantity
programming.
Reprogram the quantity
corresponding to that button. See
ch. "Programming the quantity of
coffee in a cup".
A very small amount
of coffee is dispensed
very slowly.
The C button has been
used with an espresso
capsule.
Use the A or B Button.
The materials and objects
in contact with food
products comply with the
requirements of European
Regulation 1935/2004.
See the data plate on the base of the
machine.
Max. 15 bar
Approx. 4 kg
< 70dB A
1,2 litres
ambient temperature: 10°C ÷ 40°C
170 mm 280 mm 350 mm
Technical data
Troubleshooting
PROBLEM CAUSE SOLUTION
If you try to reset after experiencing a problem with the machine, this may not
always solve the problem If this is the case please Contact the Maranatha
Customer Service line 02 9894 6247 or return to your store of purchase.