Technical data

25
English
The materials and
objects in contact with
food products comply
with the requirements
of European Regulation
1935/2004.
Technical data
See the data plate on the base of the machine.
Max. 15 bar
< 70dB A
About 5 kg
1.2 litres
ambient temperature: 10°C - 40°C
220 mm 290 mm 332 mm
No coffee comes out.
Warning light
D blinks
RED.
The water tank is empty. Fill the tank with fresh water. Press
a button to refi ll the circuit. When
the buttons remain steadily lit, the
appliance is ready for use.
The coffee is not hot
enough.
- Cold cups / espresso cups.
- Scale build-up in machine.
- Preheat cup.
- Descale.
The lever cannot be
lowered.
- The used capsule drawer
is full.
- Capsule stuck inside the
machine.
- Empty out the used capsule drawer.
- Remove the used capsule.
Warning light D is lit
steadily in RED.
Heating problems. Turn off the machine, then turn it back
on. If the problem persists, take the
machine to an Authorised Service
Centre.
When a button is pressed
to dispense coffee, the
machine seems to work
but then stops without
dispensing any coffee,
or only dispenses a tiny
amount.
Incorrect quantity
programming.
Reprogram the quantity associated with
that button.
See ch. "Programming the quantity of
coffee in a cup".
Coffee is dispensed very
slowly, and is of poor
quality.
Button C was used with an
espresso capsule.
Use buttons A or B.
Troubleshooting
PROBLEM POSSIBLE CAUSE SOLUTION