Specification Sheet

Café
™
30" Built-In Single Electric
Convection Wall Oven
CTS70DM2NS5
© 2019 GE Appliances PC92628 05/19
For answers to your Café™ product questions, visit our website at cafeappliances.com.
FLUSH INSET DIMENSIONS AND INSTALLATION INFORMATION
NOTES:
Junction Box location (may also be located in an adjacent cabinet.
Platform must be able to support 220 lbs (99 kg).
Cabinet surfaces must be an appearance finished surface for flush installation.
Cleats may be visible and should be finished to match cabinetry.
ATTENTION INSTALLER: Electric wall ovens are NOT approved for installation with
a plug and receptacle. They must be hard wired into an approved junction box.
IMPORTANT: Before installing, consult installation instructions packed with ALL
products for current dimensional and combination data.
Dimension and installation information are shown in inches.
A
B
C
D
30" (76.2) flush inset width
with
1/8" (0.3) reveals
30" (76.2)
1 5/16"
(3.3)
27 1/4"
(69.2)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
Side cleat
Top cleat
Bottom cleat
5 1/4"
(13.3)
9 1/2"
(24.1)
28 1/2" (72.4)
cutout width
3/4"
(1.9)
Side cleats
1 1/16"
(2.7)
Top cleat
3/4"
(1.9)
5 1/4"
(13.3)
3
(7.6)
9 1/2"
(24.1)
28 1/2" (72.4)
min cutout width
23 1/2"
(59.7) min cutout depth
27 1/4"
(69.2)
31 1/4"
(79.4) min
24 13/16"
(63.0)
cutout depth
24 13/16" (63.0)
cutout depth
23 1/2"
(59.7)
min cutout depth
2 1/2"
(6.4)
Side cleats
depth
29"
(73.7)
Flush inset
height with
1/8" (0.3)
reveal at top,
1/4" (0.6)
reveal at
bottom
11/16" (1.7) Bottom cleat
(Extends full depth of cabinet)
TOP VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
FLUSH INSET INSTALLATION
FRONT VIEW
STANDARD INSTALLATION
FRONT VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
ZET1SHSS
ELEC.
ELEC.
Allow 1/8" (0.3) clearances
from side edges of oven door.
B
A
C
D