Specification Sheet

Café
™
30" Built-In Convection
Double Wall Oven
CTD70DM2NS5
23 1/2" (59.7)
min cutout depth
12"
(30.5)
Recommended
cutout location
from floor
1"
(2.5) min
2"
(5.1) min
51 13/16"
(131.6)
53 3/8"
(135.6)
Flush inset
height with
1/8" (0.3)
reveal at top,
1/4" (0.6)
reveal at
bottom
24 13/16" (63.0)
min cutout depth
9 1/4"
(23.5)
28 1/2" (72.4)
cutout width
30" (76.2)
5 1/4"
(13.3)
9 1/2"
(24.1)
2 1/2"
(6.4)
Side cleats
depth
1 5/16"
(3.3)
30" (76.2) flush inset width
with
1/8" (0.3) reveals
1 1/16"
(2.7)
Top cleat
3/4"
(1.9)
Side cleats
1/2" (1.3) Bottom cleat
(Extends full depth
of cabinet)
STANDARD
INSTALLATION
STANDARD INSTALLATION
SIDE VIEW
ELEC.
ZET2SHSS
top
cleat
side
cleat
bottom
cleat
TOP VIEW
FLUSH INSET
INSTALLATION
FLUSH INSET INSTALLATION
FRONT VIEW
© 2019 GE Appliances PC92628 05/19
For answers to your Café™ product questions, visit our website at cafeappliances.com.
FLUSH INSET DIMENSIONS AND INSTALLATION INFORMATION
NOTES:
Junction Box location (may also be located in an adjacent cabinet.
Platform must be able to support 400 lbs (181 kg).
Cabinet surfaces must be an appearance finished surface for flush installation.
Cleats may be visible and should be finished to match cabinetry.
ATTENTION INSTALLER: Electric wall ovens are NOT approved for installation with
a plug and receptacle. They must be hard wired into an approved junction box.
IMPORTANT: Before installing, consult installation instructions packed with ALL
products for current dimensional and combination data.
Dimension and installation information are shown in inches.
A
B
C
D
Allow 1/8" (0.3) clearances
from side edges of oven door.
B
A
C
D