Specification Sheet

Café
™
30" Built-In Convection
Double Wall Oven
CTD70DM2NS5
DIMENSIONS AND INSTALLATION INFORMATION
30" Double electric wall ovens are approved for installation above
27" and 30" warming drawers.
WHEN TO USE THE PEDESTAL RAILS: When replacing an older
GE Appliances 30" double wall oven with a new GE Appliances
model. Cutout Height =51-13/16" to 51-15/16". This is our traditional
cutout height.
WHEN NOT TO USE THE PEDESTAL RAILS: When replacing a 30"
double wall oven from another manufacturer (ie; Whirlpool) with a
new GE Appliances model. Cutout height = 50-1/4". You will need to
verify that the existing cutout matches the 50-1/4" dimension.
If the new GE Appliances 30" double wall oven is being
installed into new construction (ie; not a replacement), then the
recommended installation is to use the pedestal rails.
ATTENTION INSTALLER: Electric wall ovens are NOT approved for
installation with a plug and receptacle. They must be hard wired into
an approved junction box.
IMPORTANT: Before installing, consult installation instructions
packed with ALL products for current dimensional and combination
data.
Flanges toward
center of cutout
Top cutout
toward front
Attachment
screws
Dimension and installation information are shown in inches.
For answers to your Café™ product questions, visit our website at cafeappliances.com.