Installation Instructions

31-2000880 Rev. 1 3
Installation
INSTALLATION OF DUCT COVER KIT
(cont.)
IV.Placethelowerductcoverontopofthe
hood. Slightly spread the sides of the duct
cover apart and snap to the upper duct cover.
Secure the lower duct cover to the 2 duct
coverbrackets(B)using2screws(J)as
shown below.
3. Follow steps below if installing in recirculation
mode.
Recirculationduct(WB34X30519)isnotincluded
with this kit and must be purchased separately.
I. Follow Steps I and II from vented installation.
II. Installrecirculationducttothewallbracket(H)
using4screws(C)asshowninimagebelow.
III. Follow step III from vented installation to
secure the upper duct cover to the wall bracket
(H),ensuringthattherecirculationholesare
aligned with the recirculation duct.
IV. Follow step IV from vented installation to
secure lower duct cover.