Use and Care Manual
49-2000061  Rev. 2 19
INSTALLATION INSTRUCTIONS
Installation Instructions
11
 INSTALL FILTERS
•  Remove protective film covering the filters.
•  Insert the filter into the “C” clips mounted to the 
top of the vertical front panel.
•  Tap the filter against one side to align with outside 
opening.
•  Pull the filter down into the lower slots at the 
bottom of the filter support.
•  To remove the filters, grasp the handle, push the 
filter up, and pull forward.
12
 FINALIZE INSTALLATION
•  Refer to the operating instructions to test all controls.
“C” Clip
Junction Box
Filter 
Support
Filters










