Installation Guide

2 31-2000374 Rev. 1
Installation Instructions
1
 REMOVE PACKAGING MATERIALS
Failuretoremovepackagingmaterialscouldresultindamagetotheappliance.Removeallpackingpartsfrom
oven,racksandheatingelements.Removeprotectivefilmandlabelsontheouterdoor.Also,removeplasticon
trimsandpanel,alltapearoundtheoven.Openovendoorandremoveliteraturepackandovenracks.Besureto
placeallliterature,Owner’sManual,Installations,etc.inasafeplaceforfuturereference.Removethebottomtrim
fromthetopoftheoven.Itwillbeinstalledattheendoftheinstallationprocess.Thetrimiswrappedseparately
andtapedtothetopoftheunit.
2
 PREPARE THE OPENING
Ifthecabinetdoesnothaveasolidbottom,twobraces
orrunnersmustbeinstalledtosupporttheweightof
theoven.ForTwinFlexWallOvens,therunnersand
bracesmustsupport220lbs(99kg).
NOTE:Ifmarks,blemishesorthecutoutopeningare
visibleabovetheinstalledoven,itmaybenecessaryto
addwoodshimsundertherunnersandfronttrimuntil
themarksoropeningarecovered.
CAUTION
Users may be burned
when using an oven mounted too high. The
recommended mounting height is based on
a 5 ft tall user.
NOTE:Ifthecabinetdoesnothaveafrontframeand
thesidesarelessthan3/4”(1.9cm)thick,shimboth
sidesequallytoestablishthecutoutwidth.
2”x4”
(5cmx10cm)
orequivalent
runnerslevelwith
bottomofcutout
Suitable
Bracingto
Support
Runners
215/8”
(54.9cm)Over
Centerline
ofCabinet