Specification Sheet

Café
™
Professional Series 30" Built-In
Convection French-Door Double Wall Oven
CTD90FP4NW2 / CTD90FP3ND1 / CTD90FP2NS1
© 2022 GE Appliances PC96509 1/22
For answers to your Café™ product questions, visit our website at cafeappliances.com.
ADDITIONAL ACCESSORIES
CXWDFHKPMBZ
Brushed Bronze
3 handles
(standard on Matte White)
CXWDFHKPMSS
Brushed Stainless
3 handles
(standard on Matte Black)
CXWDFHKPMBT
Brushed Black
3 handles
CXWDFHKPMCU
Brushed Copper
3 handles
DIMENSIONS AND INSTALLATION
INFORMATION (IN INCHES)
Note: 30" Double electric wall ovens are approved for
installation above 27" and 30" warming drawers.
Attention installer: Electric wall ovens are NOT approved
for installation with a plug and receptacle. They must be hard
wired into an approved junction box.
Important: Before installing, consult installation instructions
packed with ALL products for current dimensional and
combination data.
When to use the pedestal rails: When replacing an
older GE Appliances 30" double wall oven with a new
GE Appliances model. Cutout Height = 51-13/16" to 51-15/16".
This is our traditional cutout height.
When not to use the pedestal rails:
When replacing a 30" double wall oven from another
manufacturer (ie Whirlpool) with a new GE Appliances model.
Cutout height = 50-1/4". You will need to verify that the existing
cutout matches the 50-1/4" dimension.
If the new GE Appliances 30" double wall oven is being
installed into new construction (ie not a replacement), then the
recommended installation is to use the pedestal rails.
Flanges toward
center of cutout
Top cutout
toward front
Attachment
screws