Installation Instructions

PREPARE THE OPENING (cont.)
Installation beside another GE
Appliances/Monogram Built-in
Speedcook Oven:
• If you are mounting a GE Appliances/
Monogram Built-In
SpeedCook Oven beside
another, use the dimensions shown. The
middle rail separating the two openings may
need to be larger than the 4-1/2Ǝ minimum
shown.
25-1/4Ǝ
17-1/2Ǝ
Standard Installation Preparation
8
23-1/2Ǝ
17-1/2Ǝ
4-1/2Ǝ Min.
(5-1/2Ǝ Recommended)
PREPARE THE OPENING (cont.)
Installation under a GE Appliances/Monogram 30Ǝ or 36Ǝ Cooktop or Countertop:
Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for the
cutout size. See the label on top of the oven for approved cooktop models. This oven requires a separate,
properly grounded 15-Amp, 120-Volt, 60Hz power supply. The cooktop requires a separate power supply.
Use a 36Ǝ or wider base cabinet.
25-1/4Ǝ
Cooktop
Cooktop
25Ǝ
1-1/2Ǝ Min.
4Ǝ High
Toekick
23-1/2
Ǝ
25-1/4Ǝ
17-1/2
Ǝ
36
Ǝ
Countertop
Height
NOTE: The oven is only approved to be installed
under the specific models as labeled on the unit.
Cooktop height including depth
of electrical box on some
models. Refer to cooktop
installation instructions.
No minimum clearance required
between cooktop and oven.
IMPORTANT: Always maintain 36-3/4” minimum height from the floor to the cutout in any single or
combined installation unless plastic trim is installed.