Installation Instructions
14
Installation Instructions
6
INSTALL MOUNTING SCREWS
• Slide the oven the remaining way into the 
opening so that the side flanges and control 
panel are against the cabinet frame. Make sure 
that the oven is centered in the opening.
• Open the door, place a turntable tray in the oven 
and make sure that the tray in the unit is level.
• Drill pilot holes through the side flanges.
• Drive the color-matched screws into the side 
flanges. It is recommended that the screws 
be hand tightened.
If installing oven with an accessory storage 
drawer:
• Open the drawer.
• Drill pilot holes through the side flanges.
• Drive color-matched screws into the side flanges. 
It is recommended that the screws be hand 
tightened.
NOTE: If installing the Profile Advantium/
Convection 120V Oven with an accessory storage 
drawer, you must use the Under-the-Counter 
(UTC) mounting bracket for the drawer. 
If installing the Monogram Advantium/Convection 
integrated model 
ZSC1201 above 36Ǝ, the UTC 
mounting bracket for the accessory storage drawer 
must be used.
7
 FINALIZE INSTALLATION
• Turn power on at the source. The interior light 
should come on when the door is opened.
• Refer to Owner’s Manual for operating 
instructions.
4
INSTALL BOTTOM TRIM
CAUTION
 If installing the Advantium/
Convection 120V Oven below 36Ǝ, you must 
use the plastic bottom trim due to burn risk 
to children. The plastic trim acts as insulation 
and will help prevent burns to children from hot 
surfaces.
NOTE: If installing the Advantium/Convection 
120V Oven with an accessory storage drawer, 
the bottom trim is not required. Proceed to Step 
5.
•  Installation Below 36Ǝ, align trim tabs on the 
plastic trim to slots in the bottom of the oven.
• Installation Above 36Ǝ, align trim tabs on the 
plastic or metal trim to slots in the bottom of the 
oven.
• Secure the bottom trim to the bottom of the 
oven using 3 screws provided. 
5
INSTALL BOTTOM TRIM WITH 
ACCESSORY DRAWER
If installing with an accessory drawer, see 
installation instructions that come with the 
accessory drawer.
Metal 
Trim
Plastic 
Trim OR
Plastic 
Trim 










