Installation Instructions

2 31-2000356 Rev. 0
Safety Information
CONTENTS
Design Information
Models Available ...............................................2
Product Dimensions and Clearances ................3
Tools and Parts Required .................................3
Advance Planning .............................................3
Installation Preparation
Electrical Requirements ....................................4
Install Junction Box ...........................................4
Preparing the Opening (Installation without
an accessory storage drawer) ........................5
Flush Mount ......................................................7
With Accessory Storage Drawer .......................8
Installation Instructions
Step 1, Remove Packaging and Parts ..............9
Step 2, Route Conduit .....................................10
Step 3, Install Bottom Trim ..............................11
Step 4, Install Mounting Screws ......................11
Step 5, Finalize Installation .............................11
MODELS AVAILABLE
Café Pro Models:
CSB923P2NS1 - Stainless Steel
CSB923P3ND1 - Matte Black
CSB923P4NW2 - Matte White
Café Min Models:
CSB923M2NS5 - Stainless Steel
* Accessory storage drawer is only available for
stainless steel models
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
IMPORTANT
—
Save these instructions
for local inspector’s use.
IMPORTANT
—
Observe all governing codes and
ordinances.
• Note to Installer
—
Be sure to leave these
instructions with the Consumer.
• Note to Consumer
—
Keep these instructions
with your Owner’s Manual for future reference.
• Skill Level — Installation of this appliance
requires basic mechanical and electrical skills.
• Completion Time
—
1 Hour.
• Proper installation is the responsibility
of the installer. Product failure due to improper
installation is not covered under the warranty.
See Owner’s Manual for warranty information.
IMPORTANT
—
Use this oven only for its
intended purpose. Never use the oven for warming or
heating a room. Prolonged use of the oven without
proper ventilation can be hazardous.
CAUTION
For personal safety, remove
house fuse or oven circuit breaker before beginning
installation to avoid severe or fatal shock injury.
CAUTION
For personal safety, the
mounting surface must be capable of supporting the
cabinet load, in addition to the added weight of the
oven and drawer, plus additional oven loads.