Spec Sheet
Café
™
28.7 Cu. Ft. Built-in
Side-by-Side Refrigerator
CSB48YP2RS1
Height to top of grill (in.) A
Height to top of case (in.) B
Case depth without door (in.) C
Case depth less door handle (in.) D
Case depth with door handle (in.) E
Depth with fresh food door open 90˚ (in.) F
Width (in.) G
Width with doors open 90˚ inc. handle (in.) H
84
83-1/2
23-1/2
25-3/4
28-1/2
52-3/8
48
53-7/8
Overall
Dimensions
G
D
C
F
E
H
A
B
WARRANTY
Parts warranty
Limited 1-year entire appliance
Limited 5-year sealed refrigerating system
Labor warranty
Limited 1-year entire appliance
Limited 5-year sealed refrigerating system
Warranty notes See written warranty for full details
Height to top of grill (in.) A
Height to top of case (in.) B
Case depth without door (in.) C
Case depth less door handle (in.) D
Case depth with door handle (in.) E
Depth with fresh food door open 90˚ (in.) F
Width (in.) G
Width with doors open 90˚ inc. handle (in.) H
84
83-1/2
23-1/2
25-3/4
28-1/2
52-3/8
48
53-7/8
Overall
Dimensions
G
D
C
F
E
H
A
B
DIMENSIONS AND INSTALLATION
PRODUCT CLEARANCES
These refrigerators are equipped with a 3-position door stop.
The factory set 115° door swing can be adjusted to 90° if
clearance to adjacent cabinets or walls is restricted.
Allow minimum clearances for Freezer door (Dimension A) and
Fresh Food door (Dimension B) for a full 130° door swing and to
allow for drawer removal.
4 5/8" minimum clearance is required when door swing is
adjusted to 90°. If the 90° door stop position is used, drawer
access is maintained, but drawer removal is restricted.
130° DOOR SWING 90° DOOR SWING
B
A
23-1/2"
BEHIND
FRAME
C
D
D
Models A B C D
48" 13-13/16" 18-15/16" 28-5/8" 4-5/8"
GROUNDING THE REFRIGERATOR
IMPORTANT—PLEASE READ CAREFULLY
FOR PERSONAL SAFETY, THIS APPLIANCE
MUST BE PROPERLY GROUNDED.
The power supply cord of this appliance is equipped with a
three-prong (grounding) plug which mates with a standard
three-prong (grounding) wall receptacle to minimize the
possibility of electric shock hazard from this appliance.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
Where a standard 2-prong wall outlet is encountered, it
is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
DO NOT UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO
CONNECT THE REFRIGERATOR TO A
2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD
WITH THIS APPLIANCE.