Specification Guide

CMB903P2NS1
Café™ 30" Pro Steam Oven
For answers to your Café™ product questions, visit our website at cafeappliances.com.
WARRANTY
Parts Warranty Limited 1-year entire appliance
Labor Warranty Limited 1-year entire appliance
Warranty Notes See written warranty for full details
DIMENSIONS AND INSTALLATION INFORMATION
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating.
Note: 1-3/4" minimum between cutouts when installed
above warming drawer or single wall oven.
Installation information: Before installing, consult
installation instructions packed with product for
current dimensional data.
1" MIN. above toekick or adjust
to oven installation height
2" MIN. between cutouts
1-3/4" MIN. between cutouts required
9-1/4" cutout height
28-1/2" cutout width
Junction box location
A
B
A
B
Construct Solid Bottom
MIN. 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)
4-3/16"
Conduit
(46" long)
Cabinet width
23-1/2"
To back
of Control
18-5/8"
29-3/4"
C
L
(Must support 130 lbs.)
2x4’s or
equivalent
solid floor
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
4-3/16"
25-1/4"
Cutout width
Junction
box location
17-3/4"
Cutout height
29-3/4"
20-1/8"
23-1/2"
Back of Control
Conduit
(48-1/2"
long)
B
30"
5" MIN. from
floor 1" MIN.
above toekick
A= Allow 1" overlap of oven over top edge of cutout, and allow
3/4" below bottom edge of cutout for door swing clearance.
B= Allow 2-1/4" for overlap of oven over side edges of cutout.
Construct Solid
Bottom MIN.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
A
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
23-1/2"
Cutout depth
29-3/4"
CMB903P2NS1
1" MIN. above toekick or adjust
to oven installation height
2" MIN. between cutouts
1-3/4" MIN. between cutouts required
9-1/4" cutout height
28-1/2" cutout width
Junction box location
A
B
A
B
Construct Solid Bottom
MIN. 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)
4-3/16"
Conduit
(46" long)
Cabinet width
23-1/2"
To back
of Control
18-5/8"
29-3/4"
C
L
(Must support 130 lbs.)
2x4’s or
equivalent
solid floor
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
4-3/16"
25-1/4"
Cutout width
Junction
box location
17-3/4"
Cutout height
29-3/4"
20-1/8"
23-1/2"
Back of Control
Conduit
(48-1/2"
long)
B
30"
5" MIN. from
floor 1" MIN.
above toekick
A= Allow 1" overlap of oven over top edge of cutout, and allow
3/4" below bottom edge of cutout for door swing clearance.
B= Allow 2-1/4" for overlap of oven over side edges of cutout.
Construct Solid
Bottom MIN.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
A
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
23-1/2"
Cutout depth
29-3/4"
CMB903P2NS1
1" MIN. above toekick or adjust
to oven installation height
2" MIN. between cutouts
1-3/4" MIN. between cutouts required
9-1/4" cutout height
28-1/2" cutout width
Junction box location
A
B
A
B
Construct Solid Bottom
MIN. 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)
4-3/16"
Conduit
(46" long)
Cabinet width
23-1/2"
To back
of Control
18-5/8"
29-3/4"
C
L
(Must support 130 lbs.)
2x4’s or
equivalent
solid floor
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
4-3/16"
25-1/4"
Cutout width
Junction
box location
17-3/4"
Cutout height
29-3/4"
20-1/8"
23-1/2"
Back of Control
Conduit
(48-1/2"
long)
B
30"
5" MIN. from
floor 1" MIN.
above toekick
A= Allow 1" overlap of oven over top edge of cutout, and allow
3/4" below bottom edge of cutout for door swing clearance.
B= Allow 2-1/4" for overlap of oven over side edges of cutout.
Construct Solid
Bottom MIN.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
A
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
23-1/2"
Cutout depth
29-3/4"
CMB903P2NS1
A= Allow 1" overlap of oven over top edge of cutout, and allow
3/4" below bottom edge of cutout for door swing clearance.
B= Allow 2-1/4” for overlap of oven over side edges of cutout.