Quick Spec

CGU486SDLSS
GE Café
™
Series 48" Professional Gas Rangetop with
6 Burners and Griddle (Natural Gas)
DIMENSIONS AND INSTALLATION INFORMATION
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 6/17
Rangetop
Control panel projects forwards from
standard depth cabinets.
Front of deep cabinets can align with control
panel beveled edge.
1/2" Above Adjacent
Countertops
Rangetop
1/2" Above Adjacent
Countertops
13" Max.
18" Min.
22 3/4" Min.
46 1/4"
7/8"
*48"
2 1/2"
48"
8"
12" Minimum to
Adjacent Wall
12" Min.
Each Side
48" Minimum
to Combustibles
Non-
combustible
material
8 1/2"
Height
27 1/2" to
Front of
Bullnose
47 7/8" Width
Professional rangetops offer a number of choices in
size and rangetop configurations.
PRODUCT DIMENSIONS AND CLEARANCE:
A suitable overhead vent hood is required for models
with a grill and is recommended for all other models.
Due to the high heat capacity of this unit, particular
attention should be paid to the hood and ductwork
installation to assure it meets local building codes.
Clearances between rangetop and side wall or
combustible material must be at least 12" on
each side.
Allow 8" free space below the top surface of countertop.
Allow additional clearances below the burner box
to install the regulator and make house gas supply
connections. Use a 90° elbow to route the gas
connections and limit interference with drawers or other
cabinetry.
* The opening between a 4" high backsplash must be
36" to allow the rangetop to slide back against the wall.
WARNING: Installations without a hood require
48" minimum to combustibles above the rangetop.
A custom hood installation with exposed horizontal
combustible surfaces must have an “auto-on” feature.
Refer to hood installation instructions for specific
hood clearances. The surface of the entire back wall
above the countertop and below the hood must be
covered with a non-combustible material such as
metal, ceramic tile, brick, marble or other stone.
Rangetop
Control panel projects forwards from
standard depth cabinets.
Front of deep cabinets can align with control
panel beveled edge.
1/2" Above Adjacent
Countertops
Rangetop
1/2" Above Adjacent
Countertops
13" Max.
18" Min.
22 3/4" Min.
46 1/4"
7/8"
*48"
2 1/2"
48"
8"
12" Minimum to
Adjacent Wall
12" Min.
Each Side
48" Minimum
to Combustibles
Non-
combustible
material
8 1/2"
Height
27 1/2" to
Front of
Bullnose
47 7/8" Width
Rangetop
Control panel projects forwards from
standard depth cabinets.
Front of deep cabinets can align with control
panel beveled edge.
1/2" Above Adjacent
Countertops
Rangetop
1/2" Above Adjacent
Countertops
13" Max.
18" Min.
22 3/4" Min.
46 1/4"
7/8"
*48"
2 1/2"
48"
8"
12" Minimum to
Adjacent Wall
12" Min.
Each Side
48" Minimum
to Combustibles
Non-
combustible
material
8 1/2"
Height
27 1/2" to
Front of
Bullnose
47 7/8" Width
Rangetop
Control panel projects forwards from
standard depth cabinets.
Front of deep cabinets can align with control
panel beveled edge.
1/2" Above Adjacent
Countertops
Rangetop
1/2" Above Adjacent
Countertops
13" Max.
18" Min.
22 3/4" Min.
46 1/4"
7/8"
*48"
2 1/2"
48"
8"
12" Minimum to
Adjacent Wall
12" Min.
Each Side
48" Minimum
to Combustibles
Non-
combustible
material
8 1/2"
Height
27 1/2" to
Front of
Bullnose
47 7/8" Width