Owner's Manual

49-4000042 13

USING THE DISHWASHER

For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware

baskets may vary from your model.

Sports bottle held in place

over a Bottle Jets clip

Baby bottle held in place

under a Bottle Jets clip

Clip

Nozzle

Bottle Jets

Upper Rack

The upper rack is primarily for glasses, cups, and

saucers. For best wash performance, tilt cup and glass

openings toward the center of the rack. Other items such

as pots, pans, and plates may be placed in the upper

rack. This is also a secure place for dishwasher-safe

plastic items. The upper rack can be used for odd sized

utensils. Sauce pans, mixing bowls, and other similarly

shaped items should be placed face down for best wash

performance. Ensure small plastic items are secure so

that they cannot fall on the heater at the bottom of the

dishwasher, potentially damaging the item. Some models

are equipped with a hidden heater, so dishwasher safe

plastic items can be placed in the lower rack.

IMPORTANT: Ensure items in the upper rack do not

interfere with the 3rd Rack (on some models) when

loading and unloading.

IMPORTANT: Ensure that items do not protrude through

the bottom of the rack or silverware basket where they

will block the rotation of the middle spray arm. This

could result in noise during operation and/or poor wash

performance.

The Bottle Jets system (on some models) is the ideal

location to position baby bottles, tall sports bottles, or

other tall items with narrow openings. The Bottle Jets

clips hold bottles with small openings in place so water

jets are directed inside the bottles to clean hard to reach

areas. Clips can be installed or removed by simply

slipping the clip opening over the top of the nozzle.