Quick Guide

Café
™
30" Built-In Single Electric
Convection Wall Oven
CTS70DM2NS5
A
B
C
D
FLUSH INSET DIMENSIONS AND INSTALLATION INFORMATION
NOTES:
Junction Box location (may also be located in an adjacent cabinet).
Platform must be able to support 220 lbs (99 kg).
Cabinet surfaces must be an appearance finished surface for flush installation.
Cleats may be visible and should be finished to match cabinetry.
ATTENTION INSTALLER: Electric wall ovens are NOT approved for installation with
a plug and receptacle. They must be hard wired into an approved junction box.
IMPORTANT: Before installing, consult installation instructions packed with ALL
products for current dimensional and combination data.
1 5
(
30" (76.2) flush inset width
with 1/8" (0.3) reveals
FLUSH INSET
INSTALLATION
FLUSH INSET INSTALLATION
FRONT VIEW
Allow 1/8" (0.3) clearances
from side edges of oven door.
Dimension and installation information are shown in inches.
For answers to your Café™ product questions, visit our website at cafeappliances.ca.
© 2019 GE Appliances PC92628 05/19
D
1 1/16"
(2.7)
Top cleat
A
5 1/4"
(13.3)
ELEC.
29"
(73.7)
Flush inset
height with
1/8" (0.3)
reveal
at top,
1/4" (0.6)
reveal at
bottom
3/4"
(1.9)
Side cleats
9 1/2"
(24.1)
28 1/2" (72.4)
cutout width
11/16"
(1.7) Bottom cleat
(Extends full depth of cabinet)
30" (76.2)
Top cleat
Side cleat
Bottom cleat
B
C
24 13/16" (63.0)
cutout depth
/16"
3.3)
TOP VIEW
2 1/2"
(6.4)
Side cleats
depth