Quick Guide

Café
™
30" Smart Single Wall
Oven with Convection
CTS70DM2NS5
For answers to your Café™ product questions, visit our website at cafeappliances.ca.
C
L
WARRANTY
Parts warranty
Limited 1-year entire appliance
Labor warranty
Limited 1-year entire appliance
Warranty notes
See written warranty for full details
DIMENSIONS AND INSTALLATION INFORMATION
9-1/2" MAX.
Single wall ovens are NOT approved for stacking above or below
another single wall oven.
Wall coverings, countertops and cabinets surrounding the wall oven
must be able to withstand a temperature of up to 200°F (94°C).
If the cabinet in which the wall oven is installed does not have a
solid bottom, two braces or runners must be installed to support
the weight of the oven. The runners and braces must support up to
220 lbs (99 kg).
Door handle protrudes 3" from door face. Cabinets and drawers on
adjacent 45° and 90° walls should be placed to avoid interference
with the handle.
ATTENTION INSTALLER: Electric wall ovens are NOT approved
for installation with a plug and receptacle. They must be hard wired
into an approved junction box
IMPORTANT: Before installing, consult installation instructions
packed with product for current dimensional data.
E
22" minimum
door opening
allowance
F
21"
Conduit
48"
D
Cutout depth
23-1/2" MIN
Junction box
location
22" to
bottom of
junction box
Cutout width
28-1/2" MIN.
28-5/8" MAX.
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
A
Cutout height
B
27-1/4" MIN.
27-5/16" MAX.
C
Recommended
cutout location
from the floor
32-1/2"
Suitable
bracing
to support
runners
(must support 220 lbs.)
30''
Dimension and installation information are shown in inches.
Cabinet
30"
A - Overlap of oven at top of cutout
1-1/4"
B - Overlap of oven other side of edge of cutout
3/4"
C - Overlap of oven at bottom of cutout
1-1/4"
Oven
D - Install depth
23-1/2"
E - Overall height with trim
28-5/8"
F - Overall width
29-3/4"