Man PN 151680 Iss 0503 Rev .
Man PN 151680 Iss 0503 INSTALLATION INSTRUCTIONS WARNING: - Read and follow all installation instructions before plugging or wiring in machine to electrical circuit. ELECTRICAL • Warranty will be void if machine is connected to any voltage other than that specified on the name plate. • An electrician must provide required electrical service in accordance with all applicable national and local electrical codes.
Man PN 151680 Iss 0503 BREWING INSTRUCTIONS Café 98 Barista brewers may be preprogrammed at the factory for your particular brew parameters including; brew volumes, brew time, water temperature, brewing modes (ie pre-infusion, pulse brew), etc. If your brewer has been set up you are ready to begin brewing. If you would like to review or modify the brewer parameters, skip ahead to the PROGRAMMING INSTRUCTIONS section.
Man PN 151680 Iss 0503 FEATURE DESCRIPTION This section describes the various features of the Café 98 Barista series coffee brewers. If you are already familiar with these features, and would like to begin programming the brewer, skip ahead to the PROGRAMMING INSTRUCTIONS section. The Barista series by Café 98 incorporates the latest features in brewer control technology along with the proven brewing system you have come to rely on.
Man PN 151680 Iss 0503 Coffee Freshness Monitor – Not available on all models. Monitors the elapsed time since the brew cycle to assure the coffee is fresh. Freshness time may be set for 10 minutes to 2 hours. The last 10 minutes of the freshness time are counted down on the display and when the preset time is reached a beep is sounded and the coffee monitor light begins to flash. Some units will have a ready function rather than the coffee monitor function. Ready – Not available on all models.
Man PN 151680 Iss 0503 PROGRAMING INSTRUCTIONS • • Depress and hold Cancel button until display lights up (Approx. 10 seconds). You are now in the Program Mode. Functions to be programmed appear in the order in which they are shown in the following table. Use the Cancel button to cycle through the functions to find the one you wish to change. Use the BREW 1 button to lower the displayed value and the BREW 2 button to raise the value. Press Cancel to store the changed value and advance to next function.
Man PN 151680 Iss 0503 REPLACEMENT PARTS Electrical Components 151850 Café Excellence Control Board 151975 Barista, Newco, Control Board 105115 Transformer, 120 V Primary, 24 V ct, 40 VA Secondary 110367 Relay Kit, 50 Amp Solid State 111592 Limit Thermostat, Manual Reset 120142 Snubber (For Fill Valve) 110626 Switch, On/Off Rocker, DPST Tank Assemblies and Parts 151771 Tank Assembly, 120 V 1475 W 151766 Tank Assembly, 120 V 1775 W 151772 Tank Assembly, 240 V 3500 W 151740 Tank Element, 120 V 1475 W 151745
Man PN 151680 Iss 0503 WIRING DIAGRAMS
