SDS

Page 4 of 8 CAFCO SprayFilm WB 5 6/20/18
Safety Data Sheet
Section 8 – Exposure Controls / Personal Protection
Permissible Exposure Limits
Chemical
Name
CAS
Number
OSHA PEL
ACGIH TLV
NIOSH
Mexico
Pentaerythritol
115-77-5
15 mg/m
3
TWA
(total dust)
5 mg/m
3
TWA
(respirable fraction)
10 mg/m
3
TWA
(total dust)
10 mg/m
3
TWA
(total dust)
5 mg/m
3
TWA
(respirable dust)
10 mg/m
3
TWA
20 mg/m
3
STEL
Melamine
108-78-1
N/E
N/E
N/E
N/E
Ammonium
Polyphosphate
68333-79-9
N/E
N/E
N/E
N/E
Titanium
Dioxide
13463-67-7
15 mg/m
3
TWA
10 mg/m
3
TWA
5000 mg/m
3
IDLH
10 mg/m
3
TWA (as Ti)
20 mg/m
3
STEL (as Ti)
Glass wool
fibers
65997-17-3
5 mg/m
3
TWA
(respirable fraction)
15 mg/m
3
TWA
(total dust)
1 fiber/cc TWA
5 mg/m3 TWA
(total dust)
3 fibers/cc TWA
N/E
Engineering Controls: Provide ventilation to ensure compliance with applicable exposure limits
Respiratory Protection: A dust mask should be used in cases where the individual is exposed to airborne mists of the material.
Skin Protection: Wear cloth, rubber, or latex gloves. Use typical long sleeve work clothing or a “Tyvek” type suit .
Eye Protection: Wear proper eye protection; at minimum, safety glasses with side shields.
Work / Hygienic Practices: Use proper personal protective equipment. Eye wash stations are recommended in the work area.
Section 9 – Physical And Chemical Properties
Appearance: White liquid
Odor: Mild, minty
pH: 7-9
Melting Point (°F): Not Applicable
Boiling Point (°F): >210-215°F
Flash Point: >200°F (SCC)
Evaporation Rate: 1 (water=1)
Flammability: Not Applicable
Lower Explosive Limit: Not Applicable
Upper Explosive Limit: Not Applicable
Vapor Pressure (mm Hg): Not Applicable
Relative Density (kg/mm3) Not Applicable
Solubility in Water: Not Applicable
Specific Gravity (H
2
O=1): 1.1-1.5
Physical State: White paste
% Volatiles: 25-30%
Viscosity 20-40K CPS
Auto ignition temperature Not Applicable
Section 10 – Stability And Reactivity
Chemical Stability (under normal conditions): Stable
Possibility of Hazardous Reactions: None
Conditions to Avoid: Avoid high temperatures or freezing. Avoid incompatible materials.
Incompatibility: Strong Acids, bases, and oxidizing agents.
Hazardous Decomposition Products: Thermal decomposition may produce smoke, carbon monoxide (CO), carbon dioxide
(CO2), oxides of titanium, oxides of phosphorous, and other products of incomplete
combustion.
Hazardous Polymerization: No hazardous polymerization will occur under normal conditions.