User Guide

C. EAGLEOptionsataGlance
In order to output manufacturing data, for instance, with the CAM Pro
-
cessor, EAGLE can be started directly from a terminal window under
LinuxorfromaconsolewindowunderWindows.
Since Windows programs give up their connection to the console they
have been started from, you can use the file eaglecon.exe (located in the
demo/bin subdirectory on the CD-ROM) if you want to run the CAM
Processorfroma batchfile.
This version of EAGLE is exactly the same as the eagle.exe, except that it
doesn'tdisconnectfromtheconsole.
Type eaglecon-? foralistofCAMProcessoroptions.
Thefollowingoptionsarepermitted:
-Dxxx Draw tolerance (0.1 = 10%)
-Exxx Drill tolerance (0.1 = 10%)
-Fxxx Flash tolerance (0.1 = 10%)
-N+ Suppress message prompts
-O+ Optimize pen movement
-Pxxx plotter Pen (layer=pen)
-Rxxx drill Rack file
-Sxxx Script file
-Wxxx aperture Wheel file
-X- eXecute CAM Processor
-a- emulate Annulus
-c+ positive Coordinates
-dxxx Device (-d? for list)
-e- Emulate apertures
-f+ Fill pads
-hxxx page Height (inch)
-m- Mirror output
-oxxx Output filename/channel
-pxxx Pen diameter (mm)
-q- Quick plot
-r- Rotate output 90 degrees
-sxxx Scale factor
-t- emulate Thermal
-vxxx pen Velocity
-u- rotate output 180 degrees
-wxxx page Width (inch)
-xxxx offset X (inch)
-yxxx offset Y (inch)
Where:
xxx Further data, e.g. file name as with -W or a
decimal number as with -s.
Examples:
-W /home/user/eagle/project/aperture.whl
-s 1.25
- Default for option is off
+ Default for option is on
Example:
236
EAGLEManual