User Guide

Notesontheindividualoptions:
-D DrawTolerance(0.1=10%):
Default:0
-E DrillTolerance(0.1=10%):
Default:0
-F FlashTolerance(0.1=10%):
Default:0
-N Supressmessages:
Thisoptionsupresseswarningsorotherinformation
intheconsolewindow(DOSbox,Linuxconsole).
ThusCAMjobsrunwithoutinterruption.
Default:off
-O Route-Optimizing:
Withthisoptiontheroute-optimizingfortheplottercan
beturnedonandoff.
Default:on
-P PlotterPen(layer=pen):
If you use a color pen plotter, you can determine which layer
istobedrawninwhichcolor.
Example:-P1=0-P15=1
-R DrillRackFile:
Withthisoptionyoudefinethepathtoafilewiththedrill
configurationtable.
233
Appendix