User Guide

Open the library (here: my_lib.lbr from paragraph 8.2) that contains the
device you want to define the new package variant for. For example, by
themenu File/Open/Library oftheControlPanel.
Click the Edit-a-Device icon and select the device 54*1032A from the
menu.TheDeviceEditoropens.
DefiningthePackageVariant
The new variant should be named Test. The package must have a mini
-
mum of 14 pads because both gates together have 14 pins. As an exam
-
ple,wetakethe SO14 packagefromthe smd-ipc.lbr library.
If Control Panel and Library Editor window are arranged side by side,
select the SO14 package and Drag&Drop it into the opened Library
Editor window. After releasing the mouse button you will be asked for
the new package variant name. Enter it and confirm it by clicking OK.
Thenewvariantisnowshowninthepackagelist.
It is also possible to define the package variant in the Device Editor di
-
rectlywiththePACKAGEcommand.
Typeinthecommandline:
PACKAGE[e-mail]TEST
Orincludethepath(ifnecessary):
PACSO14@d:\eagle-4.1\lbr\smd-ipc.lbrTEST
If the path contains spaces include the path name in single quotes, for
example:
PAC'SO14@\WithSpaces\smd-ipc.lbr'TEST
Now on the lower right of the Device Editor window a new entry for
thepackage SO14 andthevariantname TEST appears.
On the left a black exclamation mark on yellow ground is shown which
indicates that there are no connections between pins and pads defined
yet.
198
EAGLEManual