User Guide

Then fetch the symbol ten times into a newly created device, setting the
addlevel in each case to Always, and use the CONNECT command to
create the connections between the SMDs and the pins. When you now
fetch this device into a schematic, all the connections appear as soon as
itisplaced.IndividualconnectionscanberemovedwithDELETE.
AfterADD,alltheconnectionsarevisibleintheschematic
Connectorwith FixingHoleandForbiddenArea
A connector is to be defined having fixing holes. On the solder side
(bottom), the Autorouter must avoid bringing tracks closer to the holes
thanacertaindistance.
Fixingholeswithrestrictedareas
195
ComponentDesignExplainedthroughExamples