User Guide

DESCRIPTION
Compose a description of the device which can also be examined by the
searchfunctionassociatedwiththeADDdialog.
4.5 The CAMProcessorDialog
Manufacturing data is generated by means of the CAM Processor. A
number of drivers for the data output are available. The drivers are de
-
finedinthefile eagle.def ,whichcanbeeditedwithanytexteditor.
Output to matrix printers, however, is not created with the CAM Pro
-
cessorbutwithaPRINTcommand.
The EAGLE license conditions allow you to give the CAM Processor to
your board manufacturer. To do this, you only need supply him with a
copy of the EAGLE freeware. Please, however, do not pass on your in
-
stallation code. This is punishable by law. The CAM Processor can run
without support from any licensing mechanism. Alternatively, your
board manufacturer can order the EAGLE freeware directly from
CadSoft.
The CAM Processor can also be started directly from the command
line. A number of command line parameters can be passed to it when it
iscalled.Thesearelistedintheappendix.
CAMProcessor
57
AFirstLookatEAGLE