User Guide

TheCommandsontheLayoutCommandToolbar

INFO

Providesinformationabouttheobjecttobeselected.

SHOW

Highlightstheobjecttobeselected.

DISPLAY

Select and deselect the layers to be displayed. Components on the top

side of the board can only be selected if the layer 23, tOrigins, is dis

played. The same applies to components on the bottom side of the

boardandlayer24, bOrigins.

See Appendix forthemeaningofthelayers.

Additional information about further options of the DISPLAY com

mandcanbefoundintheprogram'shelp.

MARK

The following mouse click defines the new (relative) origin for the co

ordinate display. You see relative coordinates (with a @ in front of the

values) as well as absolute coordinates in the coordinate display box. If

you first click the MARK icon and then the traffic-light icon, only the

absolutecoordinatevalueswillbedisplayedagain.

MOVE

Moveanyvisibleobject.Therightmousebuttonrotatestheobject.

The MOVE command cannot connect signals even if a wire (trace) is

moved over another wire or a pad. Use ROUTE or WIRE to route

signals.

SeeSchematicEditorsectionformovinggroups.

COPY

Copyobjects.

MIRROR

Mirror objects. Components can be placed on the opposite side of the

boardbyusingtheMIRRORcommand.

ROTATE

Rotateobjects(alsopossiblewithMOVE).

EAGLEManual