User Guide

CIRCLE
Drawacircle.Circleswithawidthof0aredrawnasfilledcircles.
ARC
Drawanarc.
RECT
Drawarectangle.
POLYGON
Drawapolygon.
BUS
Draw a bus line. The meaning of a bus is more conceptual than physical.
It is only a means to make a schematic easier to read. Only nets define
anelectricalconnection.Nets,however,canbedraggedoutofabus.
NET
Draw a net. Nets with the same name are connected (even if located on
differentsheets).
Nets and pins which appear to the eye to be connected are not necessar
-
ily electrically connected. Please check with the SHOW command, the
ERC, or by exporting a netlist with the EXPORT command. See also
MOVE.
JUNCTION
Place the symbol for a net connection. In general, junctions are placed
automatically, but nets which cross over can also be joined manually by
theJUNCTIONcommand.
LABEL
Place the name of a bus or net as a label. Labels cannot be changed with
CHANGETEXTbutratherwiththeNAMEcommand.
ERC
Perform an Electrical Rule Check and a consistency check for schematic
andboard.
41
AFirstLookatEAGLE