User Guide

PadReplacedwithaHole
In older versions of EAGLE it was possible to define pads in which the
hole diameter was larger than the pad diameter. This is no longer
permitted.
If you attempt to load a library file that was created with an earlier
versionandthatcontainssuchapad,thefollowingmessageappears:
The pad or via is automatically converted into a hole, provided it is not
connectedbyCONNECTtoapininoneofthelibrary'sdevices.
Ifthereissuchaconnectiontoapin,thefollowingmessageappears:
Inthatcasethefilemustbemanuallyeditedinordertocorrectthepad.
208
EAGLEManual