User Guide

-q QuickPlot:
Generatesadraftorfastoutput,whichonlyprints
theframesoftheobjects.
Default:off
-r RotateOutput:
Rotatestheoutputby90degrees.
Default:off
-s ScaleFactor:
Thosedeviceswhichcannotchangetheir
scale-factor(inthemenuoftheCAMProcessor),
haveascalefactorof1.
Default:1
-t EmulateThermals:
Worksonlyincombinationwith-e+.
Default:off
-u RotateOutputby180degrees:
Incombinationwith-r+onecanrotateby270degrees.
Default:off
-v PenVelocityincm/s:
Thisoptionisforpenplotterssupportingdifferent
speeds.Toselectaplotter’sdefaultspeed,usea
valueof0.
Default:0
-w PageWidth(inch):
Printableareainxdirection.Seealso-h.
-x OffsetX(Inch):
Thisoptioncanbeusedtomovetheoriginofthedrawing.
Default:0
-y OffsetY(Inch):
Default:0
205
Appendix