User Guide

TheULPexecutesthefollowingsteps:
•
Drawingapolygonwiththename_OUTLINES_intheselected
layeroverthewholeboardarea
•
Settingthepropertiesofthepolygon:
Rank=6
Width=diameterofmillingtool
•
Computingthepolygon;thefillingdefineswhathastobemilled
out
•
Generatingoutputdata
•
Deletingthepolygoninthelayout
Furtherinformationcanbefoundinthehelpfunction, Outlinedata.
DataforComponentInsertionMachines
EAGLE includes some ULPs which create data for various component
insertion machines and in-circuit testers. In the eagle/ulp directory you
will find various programs of this type (e.g. mount_smd.ulp, fabmas
-
ter.ulp, unidat.ulp).
To start an User Language Program use the RUN command in the Lay
-
outEditor.
9.2 WhichFilesdoestheBoardMakerNeed?
FilesGeneratedwiththeCAMProcessor
The following list contains the files which should be generated for the
four-layer board demo.brd. In this example Layer 2 is a normal inner
layer with various signals. Layer 3 is a supply layer for the GND signal,
which the user has renamed to $GND in accordance with EAGLE’s
naming convention for supply layers. The filenames are suggestions.
You are, of course, free to use unequivocal names of your own
definition.
The options given in the list are recommendations, which in some cases
canbechanged.
181
PreparingtheManufacturingData