User Guide

TheDeviceEditor:Fullydefinedresistor
Save
This completes definition of the resistor, and it can be fetched into the
schematic diagram. If you have not already saved the library, please do it
atthisstage!
Use
The newly created library has to be made available for the schematic or
layoutwiththehelpoftheUSEcommand.
This command has to be used in the Schematic or Layout Editor. It is
also possible to mark a library as in Use in the Control Panel's tree view.
See help for details. Now the library will be recognized by the ADD
commandanditssearchfunction.
148
EAGLEManual