User Guide

modifications to the library in two steps (e.g. first the pin names and
then the pin positions), or the library element can be given a new name,
sothatitisnotexchanged.
If Forward&Back Annotation is active, the components are replaced in
theschematicdiagramandinthelayoutatthesametime.
Youwillfindfurtherinformationontheprogram'shelppages.
After any library update, please carry out both an ERC on the schematic
andaDRConthelayout!
Individual components can, for instance, be updated with the aid of the
ADD command. If you use ADD to fetch a modified component from
a library, you will be asked whether all the older definitions of this type
shouldbeupdated.
Aftertheupdateyoucandeletethecomponentthatyoujustfetched.
AgainhereitiswisetocarryoutanERCandaDRCaftertheupdate!
6.6 PrintOutSchematicandLayout
Schematic diagrams, boards and also library elements can be printed out
withthe PRINTcommand.
Using DISPLAY you should first select the layers that you want to
print. The basic rule is: if you can see it in the editor, you will see it on
theprint.
Crosses marking coordinate origins for text and grid lines are excepti
-
onstothisrule.
When the printer icon on the action toolbar is clicked, the PRINT
dialogopens.
ThePRINTwindow
113
FromSchematictoFinishedBoard