User Guide

Width:
Minimum width violation of a copper object. Defined by Minimum
Width in the Design Rules (Sizes tab) or, if defined, by the track parame
-
ter Width of a referring net class. Also texts in signal layers will be
checked.
WireStyle:
The wire style of a wire which is connected to a signal is not Continuous.
Net, device and pin lists can be output by means of EXPORT or by vari
-
ousUserLanguageprograms.
CreatingManufacturingData
Prints of the layout can be created for purposes of documentation using
the PRINT command. Layers that have been activated with DISPLAY
are printed. The printout has the same appearance as the layout has on
thescreen.
Exception:Originmarksoftextsandgridlinesarenotprintable.
The manufacturing data is typically generated with the CAM Processor.
A variety of drivers are available to create drilling data, Gerber data,
plotter data and so forth. We will return to this subject in a specific
chapterlater.
In order to save costs, it may be worth supplying the layout to the board
manufacturer in the form of a multiple board. You can reproduce the
layout to create a multiple board with the GROUP, CUT and PASTE
commands. It should be noted that this will change the board’s silk
screen, since devices and signals receive new names when the layout is
placed. Ensure that all the layers are displayed before using the GROUP
andCUTcommands.
Any other data format can be created with the aid of ULPs (User Lan
-
guage programs). See the short description of ULPs in the Control
Panel.
109
FromSchematictoFinishedBoard