Service manual

5. Disassemble the
housing assembly
like this.
r-1
push it in and
6. To remove the bulb,
rotate it
counterclockwise.
Once you have replaced the burned out bulb, just reverse the steps to
reassemble the stop lamp assembly.
WIPER BLADE REPUCEMENT
Position the windshield wipers on the windshield in the mid wipe position.
To do this, turn the ignition key to Accessory and turn the wipers on.
Then with the door open, turn the ignition key to off.
th
.-L
c*
300
Start with the driver side wiper blade assembly.