Service manual

How to Add Coolant to the Coolant Recovery Tank
If you haven’t found a problem yet, but the coolant level isn’t at or above
near
“FULL COLD.” add a 50/50 mixture of clean water (preferably
distilled) and a proper antifreeze at the coolant recovery tank. (See
“Engine Coolant”
in the Index for more information about the proper
coolant mix.)
1
A CAUTION: i
Jding only plain water to your cooling system can be
dangerous. Plain water, or some other liquid like alcohol, can
boil before the proper coolant mix will. Your vehicle’s coolant
warning system is set for the proper coolant mix. With plain
water
or the wrong mix, your engine could get too hot but you
wouldn’t get the overheat warning. Your engine could catch fire
and you or others could be burned. Use
a 50/50 mix of clean
water and
a proper antifreeze.
I
t--
iL ,&
r-
c-
240