Service manual
0
Push the
SET
button.
0
Push any
two
of
the push buttons that are next to each other.
0
Repeat these steps for each station you select. Whenever you push
those buttons together, you’ll get the station you selected.
Your
Cassette Tape Player
Your tape player is built to work best with tapes that are
30
to
45
minutes
long
on
each side. Tapes longer than that use such thin tape that they
may
not work
well
in this player.
Tu
Play
A
Cassette
Tape
Have the radio on.
A
Insert the tape squarely through the tape door.
The longer side with the tape visible goes in first.
If
you hear nothing or
hear just
a
garbled sound, it may not be in squarely. Push
EJECT
to
remove the tape and start over.
Once the tape is playing, use the upper and lower knobs for volume
and balance, just as you do for radio. The arrows show which side
of
the tape is playing.
7
To
go
forward to another part
of
the tape push
FWD.
To
go
Wackward,
push
REV.
To
stop the tape, push the other button lightly.
To
go
from one side
of
the tape
to
the other, push
in
the upper knob
on
your radio.
To
remove or stop the tape, push
EJECT
148