Service manual

p WINDSHIELD WPERS
You control the windshield wipers by turning the band marked “WIPER.”
For a single wiping cycle, turn the band to “MIST? Hold it there until the
wipers start, then let go. The wipers will stop after one cycle.
If you want
more cycles, hold the band on “MIST” longer.
H
I
You can set the wiper speed for a long or short delay between wipes. This
can be very useful in light rain or snow. Turn the band to choose the delay
time. The closer to
“LO,” the shorter the delay.
For steady wiping at low speed, turn the band away from you to the “LO”
the wipers, move the band to “OFF.”
7
7 position. For high speed wiping, turn the band further, to “HI.” To stop
rr
A CAUTION:
Damaged wiper blades may prevent you from seeing well enough
to drive safely.
To avoid damage, be sure to clear ice and snow
from the wiper blades before using them.
If they’re frozen to the
windshield, carefully loosen or thaw them.
If your blades do
become damaged, get new blades or blade inserts.
r
95